对于加热棒的选择，我个人还是偏向于支持国货，我认为也没必要非要追求什么进口的。加热棒的好坏是从多方面考虑的，就拿玻璃的来说，它用的玻璃不一样，加热丝不一样，还有一些加入了防爆性能，这些都是影响价位的因素。如果你不是那种粗心大意的人，我想这方面也就没什么用了。所以大家在选择时候要全方面的了解一下，将钱用在正点上。

As for the selection of the heating rod, I personally prefer to support the national goods, and I don't think it is necessary to pursue any import. The quality of heating rods is considered in many ways. For glass, the glass used is different. The heating wire is different. Some of them are added to the explosion-proof performance, which are all factors that affect the price. If you're not that careless person, I think it's useless. So everyone should know all about it in the choice and use the money on the spot.

如果说选择高档加热棒的话，我认为加温的快慢，对水温控制的精准是重中之重。

If you choose a high - grade heating rod, I think the speed of heating, the precision of water temperature control is the most important.

不锈钢的，很多是用的电子控制温度的，由一个热敏电阻探测水温，经过转换后控制继电器或者大功率可控硅等，来控制加热管的通断。这样精确度是要比一般的双金属片高，但是如果热敏电阻或者可控硅等出了问题，他的加热速度肯定要比一般的玻璃的快。

Many of the stainless steel is used for electronic control of temperature. A thermistor is used to detect the water temperature. After transformation, control relay or high-power thyristor is used to control the heating pipe's on-off. This accuracy is higher than the general bimetallic strip, but if the thermistor or thyristor is out of order, the heating speed must be faster than that of the ordinary glass.

至于吵得挺热的那个功能“和手机关联，用手机控温”那纯属品牌特点，我也就不多叙述了，说多了都成广告了。需要的朋友自然会去选择，高手大神们估计也就看看。

As for the function that is very noisy, "mobile phone is associated with mobile phones, and temperature control by mobile phone" is purely brand characteristic. I don't talk much about it. The needs of the friends will naturally choose, the great gods are also expected to see.

2.加热棒的修理

2. reheating rod repair

如果是玻璃的，一般时候应该是玻璃壳碎裂了，一般市面上有专门的玻璃管卖，换一个就好，唯一要注意的就是换的时候注意不要把双金属片上面的可调螺丝弄松动了。再者就是安装时候要注意密封，以防漏水，这些细节的小问题，我想大家心里也都清楚，就不再废话了。不锈钢的倒没这么容易坏，但是坏了的话也就没啥修头了，直接换一根就行了。

If it's glass, it should be glass shell cracked in general. Generally, there is a special glass tube on the market, so it's better to replace it with another one. The only thing to notice is to avoid loosening the adjustable screws on the bimetallic strip when changing. In addition, the installation should pay attention to seal, in order to prevent leakage of water, the small problems of these details, I think everyone in the heart is clear, no longer nonsense. The stainless steel is not so easy to be bad, but if it is bad, there is nothing to fix, and it will go directly.

3.瓦数选择

3. watt number selection

至于多大缸用多少W的加热棒，这是跟鱼缸的装水量息息相关的，一般一公升水相对1.5W-2W的加热棒最好, 稍微有点差距倒是不怕。我建议在选用的时候可以用两根，在缸内一边放一根，这样可以加温更加快速，受热更加均匀，就是退一步来讲，一根坏了还有另一根，也不至于鱼被冻死嘛！

As for the number of W heating rods for large cylinders, this is closely related to the loading capacity of fish tanks. Generally, the heating rods of a liter of water relative to 1.5W-2W are the best, and there is a slight difference between them. I suggest that two of them can be used at the time of selection, so that one can be placed in the cylinder, so that it can be heated more quickly and heated more evenly. That is to say that if one is broken, there will be another fish, which will not freeze to death.

养鱼的时候，平时注意点，加热棒是不会坏的。

When raising fish, pay attention to it at ordinary times, and the heating rod will not be bad.

其中最重要的一点就是换水时要一定要将加热棒的电暂时断开，免得出现冰火两重天，然后“嘭~”的一声，裂了，如果鱼在附近的话……这就不好玩了。不过，即使外壳坏了，也不会电死鱼倒是，如果真出现这样的事切莫慌张，将电断开，换一个就好！

One of the most important point is to change the water must be electric heating rods temporarily disconnected, lest appear Rainbow Night, then Bang ~ "sound, split, if the fish in the nearby...... It's not fun. However, even if the shell is bad, it will not be a dead fish. If there is something like this, do not panic, break the electricity, and change one.